Product Classification
Disposable tableware production line
The main engine system is characterized by integration, hot pressing, trimming and stacking. It can be completed automatically and continuously without manual transfer. It can realize online mold removal and network replacement (completed in 5 minutes). It greatly saves the site, labor and power consumption, improves the startup rate, product qualification rate and product quality, and is convenient for maintenance.
specific parameters are as follows:
specific parameters are as follows:
| Serial number | project | Parameter index |
| 1 | Equipment name | Disposable tableware production line |
| 2 | model | WS-BYU043 |
| 3 | Template size | 1100 *800mm |
| 4 | Number of forming stations | 1 |
| 5 | Working mode of forming die | Vacuum slurry suction, vacuum dehydration molding |
| 6 | Number of hot press drying stations | 2 |
| 7 | Drying method | In mold drying and heating |
| 8 | Heating mode | Heat transfer oil heating |
| 9 | Heating power of heat transfer oil | If heat transfer oil is used for heating, the input requirement is 120000 kcal / h (Party A shall be responsible for the heat transfer boiler and pipeline) |
| 10 | Working pressure of hot pressing station | 40t (gas-liquid booster cylinder) |
| 11 | working temperature | Room temperature ~ 240 ℃ adjustable |
| 12 | Vacuum input requirements |
-0.05---0.07MPa: Excluding manipulator：5-6m3/min Including manipulator：10-15m3/min |
1. Energy saving
The transfer product is driven by the motor, which does not need vacuum adsorption transfer and saves the air pressure of the vacuum machine.
2. Save plant space
The single machine capacity is 1t, the single machine covers an area of 22 square meters, and the single machine capacity per square meter is 49kg / day.
3. Fast mold installation, screen change and long mold cleaning cycle
Mold installation shall be completed within 2 hours; Change the network without shutdown for 5 minutes; Clean the mold from January to March.
4. Good product quality
The mesh frame transfer mode makes the product free of process holes and dirt black spots.
5. Simple maintenance
The equipment adopts a pneumatic + servo drive system. The products are transferred by the mesh frame. The hot pressing die does not need horizontal movement and does not have the accuracy requirements of repeated positioning. The maintenance can be completed by ordinary maintenance workers.
